Mattstillwell.net

Just great place for everyone

What is the use of LM358N?

What is the use of LM358N?

The abbreviation LM358 indicates an 8-pin integrated circuit, comprising two operational amplifiers at low power. The LM358 is designed for general use as amplifiers, high-pass filters, low band pass filters, and analog adders.

What is LM358N IC?

The LM158 series consists of two independent, high gain, internally frequency compensated operational amplifiers which were designed specifically to operate from a single power supply over a wide range of voltages.

What is the difference between lm358p and LM358N?

The suffix denotes the manufacturer’s packaging code. The ‘N’ is used by most manufacturers for the plastic 8-pin package. The ‘P’ is used by a few manufacturers for the plastic 8-pin package. Raven Luni is right, there is NO difference between the two devices, just the mfgrs.

What is the function of the ml358 in the circuit?

LM358 IC is a dual operational amplifier integrated circuit with two Op-Amp powered by a common power supply. It consists of two independent compensated operational amplifiers with low power and high gain frequency. LM358 is specially designed to operate from a single supply over a wide range of voltage.

Can LM358 be used as a comparator?

The LM358 is a versatile uses it can be used as comparator to compare different signals, amplifying signals from a variety of transducers or sensors to dc gain blocks or any op-amp function.

What is pin configuration of IC?

By convention, the pins on an IC are numbered counterclockwise, starting with the upper-left pin closest to the clocking mark. So, for example, with the clocking notch orienting the chip at the 12 o’clock position, the pins of a 14-pin IC are numbered 1 through 7 down the left side and 8 through 14 up the right side.

What is the difference between LM358 and LM324?

For all intents and purposes, the amplifiers inside the LM358 and LM324 are the same, the only difference between the two being the number of amplifiers per package and the power dissipation capability.

What does a comparator circuit do?

A comparator circuit compares two voltages and outputs either a 1 (the voltage at the plus side) or a 0 (the voltage at the negative side) to indicate which is larger. Comparators are often used, for example, to check whether an input has reached some predetermined value.

What is the difference between op-amp and comparator?

The difference between an op-amp comparator and a voltage comparator is in the output stage as a standard op-amp has an output stage that is optimized for linear operation, while the output stage of a voltage comparator is optimized for continuous saturated operation as it is always intended to be close to one supply …

Why We Use IC 741?

Amplifiers: 741 IC is mostly used to amplify signals of varying frequencies ranging from DC to higher radio frequencies. It is also used in frequency selective amplifiers which filter out signals of unwanted frequencies, E.g. tone control systems in stereo and Hi Fi systems.

What is the function of IC 7402?

7402 IC is a device containing four independent gates each of which performs the logic NOR function. 7402 package options include: plastic small outline, ceramic chip carriers, flat packages, plastic and ceramic DIPs. The SN7402, SN74LS02 and SN74S02 are characterized for operation from 0°C to 70°C.

What is the difference between LM324 and LM324N?

LM324 has the same function as LM324N, The difference between the two is that the LM324 does not specify the package form, and the LM324N package is a plastic dual in-line package. N suffix refers to the packaging: N is DIP.

What is the difference between LM324 and LM339?

The LM324 has a complementary output while the LM339 is open collector. In the complementary output, current can flow in either direction as required (either source or sink) while the open collector output can only sink current.

What are the applications of open loop comparator?

Generally, comparators are used in the devices such as relaxation oscillators, analog to digital converters (ADCs), and also in the devices that are used to measure analog signals. The comparators consist of high-gain differential amplifiers and we can use an op-amp as a comparator circuit.

What is the main applications of comparator?

A comparator consists of a specialized high-gain differential amplifier. They are commonly used in devices that measure and digitize analog signals, such as analog-to-digital converters (ADCs), as well as relaxation oscillators.

What are comparators used for?

A comparator is used to compare a measurable quantity with a reference or standard such as two voltages or currents. It outputs a digital signal showing the results.

Which IC is used for op amp applications?

IC 741

IC 741. The most commonly used op-amp is IC741. The 741 op-amp is a voltage amplifier, it inverts the input voltage at the output, can be found almost everywhere in electronic circuits.

Why IC 741 is not used for high frequency applications?

Why IC 741 is not used for high frequency applications? IC741 has a low slew rate because of the predominance of capacitance present in the circuit at higher frequencies. As frequency increases the output gets distorted due to limited slew rate.

Which IC is used for and gate?

AND Gate
An AND gate is a fundamental digital logic gate. It gives the output by multiplying both inputs. The IC number of AND Gate is 7408.

Which IC is used for NOR gate?

There are four NOR gates in the IC and each gate has two inputs, hence the name QUADRUPLE TWO INPUT NOR GATE. The gates in the chip are designed by low power SCHOTTKY TRANSISTORS.

74LS02 Pin configuration.

Pin Number Description
NORGATE 1
2 1A-INPUT1 of GATE 1
3 1B-INPUT2 of GATE 1
1 1Y-OUTPUT of GATE1

Can I use LM358 instead of LM324?

What is lm339n used for?

LM339 is used in applications where a comparison between two voltage signals is required. In addition with four of those comparators on board the device can compare four pairs of voltage signals at a time which comes in handy in some applications.

What is the purpose of comparator?

What are the applications of digital comparator?

A digital comparator or magnitude comparator is a hardware electronic device that takes two numbers as input in binary form and determines whether one number is greater than, less than or equal to the other number. Comparators are used in central processing units (CPUs) and microcontrollers (MCUs).

What are the applications of Schmitt trigger?

Schmitt trigger devices are typically used in signal conditioning applications to remove noise from signals used in digital circuits, particularly mechanical contact bounce in switches.