What is a Bedslide used for?

Table of Contents

It basically turns the back of your truck bed into a big sliding drawer for easy access to any items that you store on your truck.

Can you sleep in a Toyota Tacoma bed?

With a Toyota Tacoma short bed you can use a HEST mattress with the tailgate down (see images below) or with a Toyota Tacoma long bed our mattresses fit with the tailgate closed. Here is how the Foamy, Foamy Wide and Sleep System fit inside the back of a Toyota Tacoma.

How do you install a bed slider?

You might have to wiggle the panel around to get it through the frame. But then you’re also going to get a serrated locking nut to go on the.

Are all Tacoma beds the same size?

Tacoma Truck Bed Dimensions

There are two options available for the Tacoma model’s bed. Both the Short Bed and the Long Bed are 19.1 inches tall and 41.5 inches wide. Of course, one of the most important things to consider when searching for a pickup truck is the length of the bed.

How much weight can a Bedslide hold?

Product Information. The BEDSLIDE CLASSIC is the perfect solution to accessing your truck bed and sliding all your stuff right from under your tonneau cover or truck cap. It holds 1000lbs evenly distributed and is backed by a 5 year warranty, LIFETIME warranty upon registration.

How do you put a slide on a truck bed?

How to Install a Bed Slide – YouTube

Is a Tacoma good for camping?

Toyota Tacoma Campers can make the ultimate camping setup. The Tacoma provides a rugged off-road platform, and the camper uses the truck bed to create a comfortable and versatile sleeping area that still leaves room for bed storage. The Toyota Tacoma is legendary for its reliability, off-road capability, and longevity.

How do you sleep in a 5 foot truck bed?

Truck Camping: 6 feet tall sleeping in a 5 foot bed – YouTube

How do you remove a bed slide?

Fully extend the BEDSLIDE® and remove the top frame by lifting up and out. The welded safety stops must go up and over the rear roller bearings and spacer guides in order for the top frame to release. Loosen and remove the cab end bed bolts using a ratchet with a T-50 torx bit.

How do you install a cargo ease bed slide?

Cargo Ease Slide Install Video – YouTube

Will a sheet of plywood fit in a Tacoma?

A sheet of plywood can fit inside the bed of the Toyota Tacoma. It will have to rest on the wheel wells, however, as the space between them is too narrow for the plywood.

How do I tell what size my Tacoma bed is?

The Toyota Tacoma with Double Cab measures 212.3 inches in overall length, but 60.5 inches of that is the bed alone. The bed is 41.5 inches wide between the wheel wells and slightly wider above or around them.

Can you drive with a BEDSLIDE extended?

NEVER drive with the Bed Slide extended. It’s just not safe driving.

How do I get rid of BEDSLIDE?

Can you remove Bedslide?

How do you camp in a short bed truck?

What size bed does a Tacoma have?

The 2022 Toyota Tacoma is no exception. Choose from one of two different bed sizes to match your specific needs: 5-foot bed (length/width/height): 60.5/41.5/19.1 inches. 6-foot bed (length/width/height): 73.7/41.5/19.1 inches.

Why does it say reading on the back of trucks?

The Benefits of Reading Tailgate Technology
This additional height matters for security for equipment and workers. It allows for better cargo confinement during a load shift, and better fits the length of a workboot. That makes it easy to use as a step for even larger shoe sizes.

Can you sleep in a truck bed with a tonneau cover?

You can absolutely sleep under a tonneau cover if you need to. While it’s not the most ideal place to sleep or camp for the night, it makes a convenient bed if you have a pickup truck.

How much does a bed slide weight?

How much does the Bed Slide weigh? Weight varies depending on your truck-bed length. A Bed Slide can be as little as 50 lbs. For short boxes, 188 lbs is typical, for long boxes – 216 lbs and Heavy Duty long boxes – 335 lbs.

How do you open a slide bed?

Using a flat blade screwdriver push the latching pin in on both sides and slide the top frame out towards the rear of the truck. Repeat this process until you are able to remove the top frame as per the installation and removal instructions.

Are tacomas half ton?

The 2020 Toyota Tacoma is not a pushover truck. It may be a class smaller than the standard half-ton pickups just about every other automaker produces, but the Toyota Tacoma can pull and carry plenty enough to hold its own.

Can you put a 4×8 sheet of plywood in a Tacoma?

In between the wheel wells, this distance is 41.5 inches. As the standard sheet of plywood is 48 inches, you will not be able to fit the sheet on the truck bed floor. You can opt to secure the plywood on top of the wheel wells, however.

Can you tell bed size by Vin?

By entering the VIN, a dealer can get a build sheet, which is a printout of how the car is equipped. That includes engine size, transmission, bed size, interior specifications and even factory options.