What is a 500 Series module?

Table of Contents

The 500 Series is a modular format for audio equipment developed by API in the 1970s. 500 Series modules are 5.25″ (3U) tall, and each slot is 1.5″ wide (modules can take up multiple slots). Modules fit into 500 Series power racks or, in some cases, directly into mixing consoles.

Do I need a 500 series rack?

Unless you’re using a console that accepts the format, you will need a 500 Series rack to store and power your modules. Racks come in sizes from 2 slots to 10, and can be portable or designed for a standard 19” rack mount.

Which company invented the 500 series?

The 500‑series format was invented by API founder Saul Walker in 1968 and it formed the basis of his console designs. The first standalone racks were probably DIY ones, but in 1978 Datatronix (who made API products when API had ceased production for a time) manufactured a 10‑slot rack.

How many rack spaces does 500 series take up?

How do I connect my 500 series to my computer?

Just connect an instrument or mic to your interface or directly to a preamp module input. Then, use balanced XLR or TRS cables to link the modules together to create the channel strip. Turn the volume down on your equipment before making the connections to prevent popping coming through speakers.

How do you rack mounting audio equipment?

DON’T Rack mount your gear until you watch this! – YouTube

How do I connect my 500 series to an interface?

How to Integrate 500 Series Gear in Production – YouTube

How high is a 500 series rack?

Most 500 series rack units are advertised with 5.5 inches (14 cm) height.

How do you set up a 500 series rack?

How far apart should rack rails be?

17.75 inches
The width between the rack-mounting rails must be at least 17.75 inches (45.0 cm) if the rear of the device is not attached to the rack. For four-post EIA racks, this measurement is the distance between the two front rails.

What should a studio rack have?

In favor of the pricier, but generally higher-quality rackmounted gear, commonly seen in pro studios.
…
What Belongs in a Studio Rack Mount?

a multi-channel mic preamp.
a power conditioner.
a headphone amp.
a monitor management system.
an audio interface.

How does a preamp and compressor connect to interface?

How To Connect a Mic Preamp & Compressor to an Interface – YouTube

How many rack spaces is an API lunchbox?

6-slot
The API 500-6B lunchbox is a 6-slot rack designed to accept all API standard 5.25″ X 1.5″ modules. This quality allows an engineer the flexibility to bring along specialized EQ effects to any situation: 550A, 550b or 560.

What does U stand for in server rack?

A rack unit (abbreviated as U, less commonly seen as RU) is a unit of measurement applied to equipment racks and the servers, disk drives and other devices that they contain. One U is 1.75 inches (44.45mm); the standard rack, at 19 inches, is 42U.

How do you count U in rack?

The total rack unit is measured from the middle of the rack’s top hole of the previous U space to the top hole of the current U space. Even though the spacing between the holes is 0.625”, the remaining 0.5” comes from the distance between the bottom hole to the top hole of a RU.

How many rack units do I need?

One “Rack Unit” is equal to 1.75″ in height. To calculate internal useable space of a rack enclosure, simply multiply the total amount of Rack Units by 1.75″. For example, a44U rack enclosure would have 77″ of internal usable space (44 x 1.75). Click here to choose racks by height.

How much does it cost to build a professional recording studio?

It costs anywhere from $30,000 to several million dollars to build a professional recording studio. A small, bare-bones studio with limited equipment would cost in the $30,000 range, while a mid-size standard studio costs $200,00 to $400,000. Large-scale studios may cost well over a million dollars.

Do I need a preamp and an interface?

You need both a preamp and an audio interface to record, unless your interface has a preamp installed in it. If you’re new to recording equipment, you may not even know what a preamp or audio interface is.

How do you wire a preamp to a compressor?

What type of EQ is this api550b?

API 550b 500 Series Modular 4-band Equalizer Features:
4 bands of their famous-sounding equalization. Each band offers 7 API-selected frequency centers. Reciprocal and repeatable filtering.

Is an API an application?

API stands for Application Programming Interface. In the context of APIs, the word Application refers to any software with a distinct function. Interface can be thought of as a contract of service between two applications. This contract defines how the two communicate with each other using requests and responses.

What does 1U 2U 3U 4U mean?

The 1U, 2U, 3U, 4U, 5U, 6U and 7U are all different sized rackmount servers, and the U following the number is short for unit. The number indicates the size of the rackmount, 1U being the smallest rackmount and 7U being the biggest rackmount.

What is 42U stand for?

rack units
the “U” in “42U” is stands for “rack units,” or “U-spaces,” which equal 1.75 inches. If you are investing in data center racks, the standard height is 48U (“7-foot rack”) or, on some occasions, 42U.

What does 12U rack mean?

For 12U, the “U” stands for the rack unit that is an EIA standard measuring unit for rack mount type equipment. 1U is equal to 1.75″ in height. A 12U wall cabinet means it would have 21″ internal usable space (12×1.75″).

How deep should a server rack be?

The depth was commonly 19″ to 24″. This depth is still used for Audio Racks. The most common depth is now approximately 29″ since this is close to all OEM’s. 2Post relay rack’s mounting depth is also called the Upright Depth.