What is a 22 ton Huskee log splitter worth?
Huskee makes larger versions of the log splitter but after renting the 22 ton I could not find a log the splitter could not handle. So, I could not see why I needed to spend more money on a larger model. The splitter retails for around $1000. After the 10% off coupon it cost around $900.
How many tons is a good wood splitter?
A 6 inch in diameter hardwood like elm or hickory will need a splitter of about 10 tons and above, but if they are a softwood like a pine then you will only need a 4 ton unit.
What is a good tonnage for a log splitter?
12 To 22 Ton Log Splitters
For the softer kind of woods that are 12 inches in diameter I’d recommend a 12 to 15 ton log splitter. If they’re of the harder variety, I’d recommend 20 to 22 ton splitters.
What size log can a 20 ton log splitter handle?
This powerful machine handles logs up to 24 inches long, weighing up to 100 pounds.
Is a 22 ton log splitter enough?
Pine wood that is above 20 inches in diameter is perfect for splitting with a 22 ton log splitter. Oak wood is similar to Dogwood in that the small diameter requires a tougher log splitter.
…
Woods That Are Suitable To Split With A 22 Ton Log Splitter.
| Our Rating | 9 |
| Our Rating | Check Price On Amazon |
Do they make Huskee log splitters?
Huskee brand lawn mowers, lawn tractors, push mowers, log splitters, snow throwers, tillers and cultivators offer affordable power. Compare to other national brands and you will see that Huskee® brand equipment works as hard as you do.
Is a 20 ton wood splitter enough?
The thicker a log is, the more wood there is to force apart on either side of the grain. Logs that are larger in diameter need more pressure to split. That’s why a 4-ton log splitter will work well for 6″ branches, but a 24″ tree trunk will require at least the force of a 20-ton splitter.
Is a 22 ton log splitter big enough?
Pine wood that is above 20 inches in diameter is perfect for splitting with a 22 ton log splitter. Oak wood is similar to Dogwood in that the small diameter requires a tougher log splitter.
How much does a 22 ton wood splitter cost?
Do Higher Tonnage Splitters Cost More?
| Tonnage | Price Ranges |
|---|---|
| 7 – 15 | $600 – $1,200 |
| 16 – 22 | $1,000 – $3,250 |
| 23 – 29 | $1,000 – $5,500 |
| 30+ | $1,200 – $7500 |
Who makes the best quality log splitters?
Best Overall: Champion Power Equipment 27-Ton Splitter
And with a full beam to support the entire length of the log, as well as side catchers to keep the log steady, you’ll find the experience of splitting your own firewood much easier, as well as safer.
Is a 25 ton log splitter big enough?
The 25-ton log splitter should be enough for you in most cases. However, if you’re a wood-splitting machine and split many cords per season, then maybe consider a heftier, 40-ton splitter.
How much is a used wood splitter worth?
Used log splitters on average can cost between $400 to more than $2000 depending on the condition, power ratings, and more.
What is a good cycle time for a log splitter?
between 10 and 20 seconds
Most standard hydraulic splitters can have cycle times between 10 and 20 seconds which will suit most people. Sometimes a slower cycle time comes with added force so you can split a much larger and knotted log you normally couldn’t.
What is a kinetic wood splitter?
In place of hydraulic pump systems, kinetic splitters use massive flywheels to convert energy from a motor or engine into a burst of force. That force drives a moveable rack and push plate into a log and pushes the log against the splitting wedge, breaking the wood apart.
How much do wood splitters cost?
The lowest price is for a hydraulic log splitter that will cost you just $649.99, while their most expensive product is a high-end Deluxe hydraulic splitter that costs $1,999.99.
How long should a log splitter last?
This largely depends on the type of log and how hard it is to split, but 150 hours is the average benchmark.
How long can you run a log splitter?
Most standard hydraulic splitters can have cycle times between 10 and 20 seconds which will suit most people. Sometimes a slower cycle time comes with added force so you can split a much larger and knotted log you normally couldn’t.
What is the fastest wood splitter?
Generac 10-Ton Kinetic Electric Log Splitter
To say that this is the worlds fastest log splitter is an incredible statement, but in my opinion the Generac kinetic splitter is the world’s fastest. It has the quickest cycle speed of any splitter I have ever used coming in at just 1 second.
What is the difference between a kinetic and hydraulic log splitter?
The most obvious and biggest advantage to hydraulic log splitters, is that generally they are a lot more powerful, and can split larger logs then their kinetic counterparts. Hydraulic systems have an easier time getting through knotty woods, and will struggle far less on hard woods.
How do you split wood without a log splitter?
Use a knife or a very sharp rock to create a crevice in the wood to be split, then commence tapping your wooden wedge points into the log. Plan to place the first wooden wedge near the edge of the log and to tap it in a bit, then place another next to it, and so forth.
How often do you need to change hydraulic fluid in a log splitter?
How often should you change hydraulic fluid in a log splitter? A lot of manufacturers will advise that you should change your fluid after every 50 hours. However, if the fluid used is of high quality this will usually give you around 150 hours of log splitting operation.
Should I grease the beam on my log splitter?
Another obviously important part of your hydraulic log splitter is the ram. You need to keep the ram fully greased up. Keep every square inch of it greased, because a dry ram will quickly become a rusty ram. Rusted rams will damage the hydraulic seal, and you do not want to damage the seal.
Can you pull a log splitter down the highway?
Log splitters should not be pulled on highways. Highways have a minimum speed limit that varies between 30 to 45 mph depending on where you live. The majority of the commercially built log splitters are not designed to be pulled at speeds above 5 to 35 mph.
Do log splitters need to be level?
The log splitter should always be operated on level ground or be pointing uphill. If your log splitter is failing to split any logs, 90% of the time this will be the issue. If the log splitter is not pointing downhill then it’s likely low oil.
How fast can you tow a log splitter?
Highways have a minimum speed limit that varies between 30 to 45 mph depending on where you live. The majority of the commercially built log splitters are not designed to be pulled at speeds above 5 to 35 mph. At the same time, some higher-end or home-built log splitters can be towed at a higher speed up to 70 mph.