How do you install CertainTeed shingles?
It can be applied using one of two different approved methods most commonly guys will use the six and eleven offset. It’s a diagonal method five-course.
How many nails are required for Landmark shingles?
Use four nails for every full shingle as shown below. Figure 12-4: Use four nails for every full shingle. IMPORTANT: When “six nailing” a full shingle, follow the nail pattern shown in figure 12-5, nails can be placed in the 11⁄2″ nailable area.
Are closed valleys preferred when installing Landmark shingles?
Closed-cut valleys are preferred by CertainTeed when applying any Landmark Series shingles; however, open and woven valleys are also acceptable.
Where is the proper place to nail a shingle?
Now that you know where to put the nails. It’s time to drive them properly. Keep the nail straight 90 degrees from the shingle surface. This is to avoid the nail head cutting through the shingle.
What is the difference between Landmark and Landmark pro shingles?
Landmark PRO shingles are constructed in exactly the same way as Landmark shingles, but with thicker layers of asphalt. Landmark PRO shingles weigh in at a heavier 270 pounds per square, providing an additional level of durability to your roof.
Is Certainteed landmark A good shingle?
So, are Landmark shingles good? Yes, of course! Let’s take a look at the most significant advantages of Certainteed shingles: Their selection of luxury shingles – Certainteed is known to have one of the best selections of luxury shingles in the roofing industry.
Should roofing nails go through the sheathing?
Roofing nails should be at the correct length to secure roof coverings. It should pass through the sheathing and should extend 3/8 inches past the bottom of the roof heating.
How far should roofing nails penetrate?
3/4 of an inch
Nails should be long enough to penetrate 3/4 of an inch into a roof deck; if a roof deck is less than 3/4 of an inch, nails should be long enough to penetrate and extend at least 1/8 of an inch through the roof deck.
Which side of the valley do you shingle first?
Woven: Shingles are overlapped across the valley on alternative slopes. Closed Cut: Shingles are first installed on the side of the valley with a lower slope. Once, covered, the contractor moves to the side with a higher slope. Shingles are cut on the higher slope in a straight line through the valley.
Is valley flashing necessary?
Closed valleys aren’t required to have metal flashing, but they should have additional underlayment lining the valley, preferably a couple layers of roll roofing. You can usually see whether this has been done by looking carefully at the bottom edge of the valley.
Should nails be exposed on shingles?
Ideally, you should never see the nails on your roof. Properly installed nails should be flush to the shingle they are inserted into and covered by the shingle above them. The ensures that they are secure and unseen.
How long does CertainTeed Landmark shingles last?
about 30 years
On average, CertainTeed Landmark shingles are designed to last for about 30 years if they’re installed correctly and taken care of throughout the years. If you choose Landmark Premium shingles, they can last up to 50 years with the proper installation and maintenance.
What is the most popular landmark shingle color?
These are the most popular roofing shingle colors and brands:
- Black. CertainTeed Landmark Shingles – Charcoal black.
- Dark brown. CertainTeed Landmark Shingles – Burnt Sienna.
- Dark grey. GAF Timberline AH Shingles – Appalachian Sky.
- Light brown. GAF Timberline AH Shingles – Saddlewood Ranch.
How long do Landmark CertainTeed shingles last?
Is CertainTeed landmark a 50 year shingle?
Because of the weight of Landmark TL, they are also rated as 50-year shingles but may not be ideal for every type of roof.
Do you nail shingles on the tar line?
How to : Roofing – Where and How to Nail a Shingle – YouTube
Are shingle nails supposed to go through plywood?
Roofing nails should be long enough to penetrate the roofing material and go 19 mm into OSB, solid wood, plywood or non-veneer wood decking, or through thickness of decking, whichever is less.
Should roofing nails go through the plywood?
Nails should never go through the plywood, water does go under the shingles and rust the nail thus making it thinner, more water to go through, the correct nail length should be the sum of the shingle thickness plus the underlying materials minus 1/4 inch…it is strange that protruding nails are thought to be normal!
How far should shingles overlap a valley?
Shingles should overlap the edge of the liner panels by at least 6 in., and at least 3 in. of metal should be exposed on each side of the valley center for appearance and water flow.
How far should roofing nails penetrate the sheathing?
Should roofing nails go through plywood?
Do CertainTeed landmark shingles qualify for tax credit?
Certainteed® has recently developed Landmark Solaris® shingles which all meet the standards for the federal tax credit.
What is the most popular shingle color for 2022?
The 5 Most Popular Roof Shingle Colors in 2022
- Black. Does black ever really go out of style?
- Light Brown. Light brown shingle colors such as sand and taupe are hot in 2022.
- Dark Brown.
- Soffit, Fascia, and Trim.
Should shingles be lighter or darker than siding?
Shingle Color Should Be Darker Than the Body of the House
A general guideline you should follow when matching roof shingles to the color of your house is that you should almost always choose a roof shingle color that is darker than your house siding.
What is the most popular CertainTeed shingle color?
Burnt Sienna – The most traditional option among the CertainTeed Landmark shingle colors, Burnt Sienna shingles have a warm reddish-brown hue that is a safe style choice for traditional homes, yet is still exciting enough to make your new roof really stand out!