How do you inspect a bucket truck?
Make sure that all the bolts are there and that nothing is missing. Once we’ve done the visual visual inspection check the fluid levels on the chassis.
What do you need to operate a bucket truck?
A driver must have a CDL to operate a vehicle with a gross weight over 26,000 lbs. So, bucket trucks or digger derricks weighing less than 26,000 lbs will be legal to operate without a commercial driver’s license.
What can you not do in a bucket truck?
To avoid tip overs, always follow these simple rules:
- Never exceed the bucket’s load capacity.
- Never move the truck while the bucket is extended.
- Never use your bucket truck as a crane. If you need a crane, use a crane.
- Always properly position the truck’s outriggers.
- Never operate during high winds.
What is a dielectric test on a bucket truck?
The dielectric test verifies the electrical insulating strength in the FRP upper and lower booms, bucket, liners, FRP extensions on digger derricks, tool circuits, and upper control system.
How often do bucket trucks need to be inspected?
every three months
Periodic inspections are thorough inspections done at least every three months and include all items listed. OSHA also requires that signed and dated records of these are properly maintained and archived.
What is a ANSI inspection?
ANSI inspections ensure that aerial lifts are in safe working order. Knowing what they are and how to prepare for them can significantly reduce costly repairs and downtime.
Does OSHA require bucket truck training?
Yes, aerial lift certification is required by OSHA. Your employees can’t legally operate aerial lifts, scissor lifts, aerial work platforms (AWPs), or mobile elevating work platforms (MEWPs) without training.
What class is a bucket truck?
Examples of Trucks in Each Truck Class
|Class 1 – 6,000 lbs & Less
|Class 4 – 14,001 to 16,000 lbs
|Class 5 – 16,001 to 19,500 lbs
Can you move a bucket truck with someone in the bucket?
Never moving the equipment while anyone is in the bucket unless specifically permitted by the manufacturer. Never moving the equipment while the bucket is in a raised position unless permitted by the manufacturer. Keeping a minimum clearance of at least 10 feet from energized lines.
Do you have to wear a harness in a bucket truck?
According to the OSHA website, “While working in a bucket or basket workers must wear fall protection equipment with the lanyard connected to an anchor point connected on the boom, bucket or basket.” OSHA 19 10.67 requires this because mechanical failures can result in buckets flipping or separating from the boom …
How long is a dielectric test good for?
If the equipment has not had a dielectric test performed within the last 12 months, as required by ANSI and OSHA, it cannot be considered insulating.
Does OSHA require scissor lift certification?
Description. OSHA regulations require that anyone who operate a Scissor Lift MUST obtain the proper Training and Certification.
Is a bucket truck considered an aerial lift?
An aerial lift is defined as any vehicle-mounted device used to help workers complete tasks at heights. It can be a bucket truck, cherry picker, or other lift that is used to access elevated areas. Aerial lifts are supported by a boom, which is different from a scissor-type lift mechanism.
Are bucket trucks considered MEWP?
Mobile elevating work platforms are bucket trucks. Formerly known as Aerial Work Platforms, they are either aerial lifts or scissor lifts.
How much is a bucket truck worth?
Expect to pay $37,000 to $140,000 for a standard light-duty bucket truck that’s used for routine facilities maintenance, utility service, or something similar. Heavy-duty trucks used for construction, forestry, and a range of other tasks at elevated heights run between $84,000 and $370,000.
Are you required to wear a harness in a bucket truck?
Can a bucket truck tip over?
While bucket trucks are fairly simple to operate, they do present a unique set of hazards, including a risk for falls, the potential for tipping over, as well as increased possibilities for collision with other stationary or moving objects and contact with electric power wires.
Do you need fall protection in a bucket truck?
Can you use a JLG as a tie-off point?
Now the company is offering a new system that bolts on to existing JLG® platforms in the field. This feature allows an occupant to exit the platform at height and step onto adjacent structures while being tied off to an approved lanyard anchor point on the platform.
How often does the dielectric testing on trucks have to be completed?
(F) Effective Feb. 23, 1998, insulated bucket liners used for work on energized high voltage conductors and equipment shall have a periodic dielectric test performed every 12 months in accordance with paragraph 5.4.
Does scissor lift require annual inspection?
The answer is “frequent” inspections are required when: The lift was purchased as used equipment unless it is already up-to-date on frequent and annual inspections. The lift has been in service for 3 months, or 150 hours – whichever comes first. The lift has been out of service for more than 3 months.
Does scissor lift training expire in Ontario?
In Ontario, elevating work platform training does not have an official expiry.
How long do bucket trucks last?
Forestry bucket trucks – Versalift Overcenter
Many of our fleet clients buy their forestry equipment from us with the expectation that it will last 15-20 years, though on many cases, those trucks are still on the road many years later than that.
How much is a brand new bucket truck cost?
Telescopic articulated bucket truck
Expect to pay $70,000 to $150,000 for new and recently manufactured models.
How windy is too windy for a bucket truck?
Bucket trucks are meant to operate on stable ground in normal weather conditions. Windy conditions are especially dangerous, so avoid raising the lift if wind speeds are over 30 miles per hour. With lower wind speeds, exercise caution since a bucket truck tip over can happen even at 13 miles per hour.