Just great place for everyone

How can I get faster at RC racing?

How can I get faster at RC racing?

What you want to try and do is feather that throttle. So that you can slow the car down but keeping the car under control as you come in and out of turns.

How can I improve my RC drive?

Stand where you stand and operate your car it’s really important to never put your RC car down on the straightaway.

What should I bring to RC track?

And you forget the body but bring your truck. Your body the tires and then your remote don’t forget about your transmitter. And batteries for your transmitter.

How do you corner a remote control car?

So we have i like to break the corner down into three parts. Okay so you have corner entry where you’re gonna do all of your slowing down hitting the brake. And start your corner angle.

What gear ratio is best for RC drag racing?

The Drag Slash’s standard 76/22 gearing is perfect for all-around driving fun.

How wide is a 1/10 scale RC track?

For 1/10 track you can go with 8 ft lanes and 1/8 you want 10 foot lanes . As far as total size of a track , that is up to you .

How do you tweak an RC touring car?

Setup tips for RC touring car – Removing tweak from chassis. Xray …

How wide should an RC track be?

The ideal track size is 12′ x 24′ with a 3′ wide racing lane. You can obviously make it larger or smaller depending on your available space. The 12′ x 24′ size makes for good racing and keeps the cars controllable for all racers. Be sure your area is fairly smooth.

How do you make a mini Z track?

I Made A Track For Mini-Z RC Cars – YouTube

How do I stop my RC traction roll?

Traction rolling coming out of the corner means you need a rear sway bar. Raising the roll center (making the inner hinge pin and inner ball stud closer together) will resist suspension roll too. Same thing as the sway bars, if it is traction rolling going in adjust the front, coming out adjust the rear.

What causes traction roll?

Correct, a traction roll occurs when the car has too much grip and flips over. Sometimes from the front if it occurs early in the corner, and from the rear if it occurs toward the middle or exit. Harder tires are usually the easiest fix, stiffer springs can help as well.

How fast is the Traxxas drag slash out of the box?

How Fast Is The Traxxas Drag Slash? We Put The GPS On And – YouTube

How do you calculate gear ratio in drag racing?

To determine the vehicle’s overall First gear ratio we simply multiply the First gear ratio by the rear axle ratio (e.g., 2.48 x 4.10 = 10.17:1).

The formula looks like this:

  1. ODR = (Original Tire Dia. New Tire Dia.) x Gear Ratio.
  2. ODR = (26 28) x 4.10.
  3. ODR = 0.928 x 4.10 = 3.80:1.

What size is a 1/8 scale car?

The majority of models are approximately 11 inches (280 mm) long by 5 inches (130 mm) wide by 4 inches (100 mm) tall, depending on the type of vehicle that is being represented.

How wide should RC track lanes be?

How do you use a tweak station?

How to use a Tweak Station – YouTube

How do you use a Hudy setup station?

Hudy Setup System – YouTube

How does track width affect handling?

Increasing track width lowers weight transfer, increasing handling. Increasing the front more will lead to more oversteer… which we already have a heaping helping of in our cars. You can make it up some with additional tread width in the back, or a stiffer rear swaybar, or spacers.

What kind of dirt is used for RC tracks?

Its like 40% Dirt, 40% clay, 20% sand.

How wide should a Mini Z track be?

The track lane width is approx. 19″ wide from inside to inside rail. This track is not recommended for beginners who run 1/24 scale cars unless the RCP expansion kit is purchased to widen the lane width.

How big is a mini Z track?

At just 7 inches in length, the Mini-Z only requires about 8×4 feet of space in your garage or living room. You don’t need to go to a special race track.

How do I lower my RC understeer?

Reduce understeer

  1. Thicker rear anti-roll bar / thinner front anti-roll bar.
  2. Softer front tires / harder rear tires.
  3. Higher rear roll center / lower front roll center.
  4. Harder springs / heavier oil / smaller piston holes.
  5. More Ackermann angle.
  6. More caster.
  7. Increase shock angle (less upright)
  8. Bias weight towards the front.

Does high speed increase traction?

As your speed increases the vehicle exerts less pressure on the road and traction decreases. The condition of your tires. Heavily worn tires become smooth and offer less traction. The condition of the road surface.

Do stiffer shocks help with body roll?

By lowering the car, using stiffer springs/bars, significantly stiffer shocks, etc, Street Touring vehicles reduce (and slow down) roll, thereby greatly reduce roll inertia, and as a result change direction very quickly.

What is the best final drive ratio for RC drag racing?

A 5.5 will run a lower gear (higher ratio) than an 8.5, so I would recommend a 10.1 to 10.25:1 to give a rough start.