What size line does Homelite trimmer use?
0.080-inch
It uses dual 0.080-inch cutting lines on a 17-inch diameter head.
How do you remove the head of a Homelite trimmer?
Reach your fingers over the cover until you can feel the two tabs on opposites sides of the cover. Squeeze the tabs together, and lift the cover at the same time. The cover should come right off.
How do you change the line on a Homelite trimmer?
Side. So I want it to be pretty close to even on each on either side. And so that’s so that’s even now.
Who makes Homelite trimmer?
Techtronic Industries
Beginning in the late 1970s, Homelite gradually expanded its power equipment line to include string trimmers, leaf blowers, push mowers, and hedge trimmers. John Deere acquired the brand in 1994. Techtronic Industries acquired Homelite from John Deere in 2001.
What spark plug does a Homelite trimmer use?
Champion spark plug (RCJ6Y).
How do you put a universal trimmer head on?
Universal Bump Trimmer Head Installation Method 3 – YouTube
What is fixed line trimmer head?
Fixed head systems use individual lengths of line that are loaded or threaded into the trimmer one at a time as needed. This avoids some of the hassles of winding line onto trimmer heads and makes the overall process of dealing with trimmer line less cumbersome.
Why does my strimmer use so much line?
If this cap is broken or worn out over time, it can malfunction, causing too much line to feed out when you bump it. Depending on its damage, it could be getting hung up as it tries to return, allowing the line to continuously advance. To replace it, simply remove and replace the bump cap with a new one.
How do you get strimmer wire out?
Replacing String Trimmer Line – YouTube
Did Homelite go out of business?
Deere & Company announced on Nov. 16, 2001 that it has sold its Homelite consumer products business.
What happened to Homelite?
John Deere acquired the brand in 1994. Techtronic Industries acquired Homelite from John Deere in 2001. Homelite has shifted its production primarily to consumer level lawn and garden equipment and light duty chainsaws.
How do you change the spark plugs on a Homelite trimmer?
Replacing the Spark Plug (Homelite Part # 870174001) – YouTube
Where is the model number on a Homelite trimmer?
What’s my model number? Homelite model numbers are found on the data plate or data label on the machine. This is usually located on the back or bottom of the unit.
Are trimmer heads interchangeable?
Almost any trimmer head can be made compatible to almost any trimmer with the right arbor bolt adapter. Bolt adapters can change any or all of the four trimmer head arbor bolt specifications.
How do you replace a trimmer head?
How to Change a String Trimmer, Weed Eater, Weed Whacker Head
What types of line trimming heads are there?
But at the core of the matter, there are only three line-feed designs: Bump feed. Automatic feed. Fixed head (or fixed line)
Are all trimmer heads interchangeable?
Is Thicker strimmer wire better?
Strimmer line typically varies between 1.5mm and 3mm. The larger, heavier machines require a thicker gauge or quite simply, under heavy load will break too easily.
How long should trimmer line last?
A trimmer line should last about three to six months if you cut the weeds weekly. A high-quality trimmer line spool lasts longer than low-quality strings, but it also depends on how often you trim the weeds. Soak your trimmer line in water to make it last longer.
Is all strimmer wire the same?
Why does my trimmer line keep jamming?
The trimmer line is too short to bump: If you let your string shorten while trimming until it recedes into the spool housing, it’ll get stuck, and then you’ll have to stop all of your trimming activities to open the housing and try to fix it.
Can you still get parts for a Homelite chainsaw?
While some Homelite chainsaw parts have been discontinued, you may still be able to find them on eBay. So, don’t fret if you are searching for old Homelite chainsaw parts. These are often found in both new and used conditions.
How can I tell how old my Homelite chainsaw is?
Call (800) 242-4672. Wait for a Homelite technician to get on the phone and then relay both numbers to them so they can get you the date the saw was manufactured.
Is Homelite still around?
What is the spark plug gap for a Homelite trimmer?
5. Insert a spark plug gap tool in between the thin metal protrusion at the top of the spark plug and the round section below it. Homelite string trimmers require a gap between these two parts of 0.025 inches.