Mattstillwell.net

Just great place for everyone

How do I put my HP switch into control mode?

Admin

How do I put my HP switch into control mode?

Configuration commands and the context configuration modes

  1. HP Switch(config)# interface c3-c6. HP Switch(eth-C5-C8)#
  2. HP Switch(eth-C5-C8)# HP Switch(eth-Trk1)#
  3. HP Switch(config)# vlan 100. Command executed at configuration level to enter VLAN 100 context.
  4. HP Switch(vlan-100)#
  5. HP Switch(vlan-100)#?

How do I configure my HP SAN switch?

HP StorageWorks 8GB SAN Switch – Configuring the SAN Switch for Use in a Network

  1. Obtain required items.
  2. Power on the 8Gb SAN Switch.
  3. Make a serial connection.
  4. Power on the switch.
  5. Set the switch IP address.
  6. DHCP.
  7. Setting a static IP address.
  8. Set the switch date and time.

What is the default password for HPE B-series SAN switches?

Default username and password is “admin” and “password”.

How do I find the interface description on my HP switch?

You can use the options with the startup config command, show config, and the running config command, show running-config.

What is the default password for HP switch?

The default username for first time configuration is admin, no password is required. Usernames and passwords are case sensitive.

How do I create a VLAN on an HP switch?

Configuring basic VLAN settings

  1. Enter system view, use the command: system view.
  2. Create VLANs, use the command: vlan { vlan-id1 [ to vlan-id2 ] | all }
  3. Enter VLAN view, use the command: vlan vlan-id.
  4. Configure a name for the VLAN, use the command: name text.
  5. Configure the description of the VLAN, use the command:

How do I configure zoning on HP SAN switch?

Steps Of Zoning in Brocade SAN Switch

  1. Check Connectivity of HBA Port To Fabric.
  2. Create FC Alias Name For HBA Port WWPN and Storage Array Port WWPN.
  3. Create a ZONE and add alias members.
  4. Add the zone to active configuration zone.
  5. Save the active configuration zone.
  6. Enable active configuration zone.

How do I access my Brocade SAN switch GUI?

Accessing GUI of Brocade SAN Switch without Broswer

  1. Console to the Brocade SAN Switch with default username = admin & Password = password to configure the IP Address Warning: Default password not changed for ‘root’.
  2. Install the latest JAVA version.
  3. Add the IP Address of the SAN Switch to Exception Site List in JAVA.

What is the root password for Brocade switch?

The default password of “admin” is “password”. The OS of brocade switch uses Linux 2.6 kernel. The root is super administrator account.

What is the default switch routing policy of a B-Series switch?

Answer. The default routing policy for 4Gb capable B-series switches is Exchange Based Routing Policy .

How can I see the configuration port?

Viewing the startup configuration of interfaces

Use the show config command to view the startup configuration of all interfaces. Use the show config interface port-list command to view the startup configuration of the specified port interfaces.

How do I configure a switch port?

Switch ports can be manually configured with specific duplex and speed settings. Use the duplex interface configuration mode command to manually specify the duplex mode for a switch port. Use the speed interface configuration mode command to manually specify the speed for a switch port.

How do I reset my HP switch password?

If you lose or have forgotten a switch password: Solution: You can clear the switch password by pressing the recessed Clear button on the front of the switch. This action deletes all password and user name protection from all of the switch’s interfaces.

How do I reset my HP switch?

Solution:

  1. Using pointed objects, simultaneously press both the Reset and Clear buttons on the front of the switch. The power and fault lights come on.
  2. Continue to press the Clear button while releasing the Reset button.
  3. When the Self Test LED begins to blink, release the Clear button.

What is tagged and untagged VLAN in HP switch?

Tagged – When a port is tagged, it allows communication among the different VLANs to which it is assigned. Untagged – When a port is untagged, it can only be a member on one VLAN. No untagged – The port is not a member of that VLAN.

How does VLAN tagging work?

VLAN tagging is performed by the putting the VLAN ID into a header to identify which network it is present in. This helps in determining which interface or broadcast area the information packet needs to be sent to in order to receive the right information.

How do I configure SAN zoning?

What are the 2 major types of zoning in SAN?

There are two distinct methods of zoning that can be applied to a SAN: World Wide Name zoning and port zoning.

What is the default root password for Brocade switches?

We have to use a console cable to connecting the switch . And use the root account to reset password under CLI. The default password of “admin” is “password”.

How do I access Brocade?

Accessing the Brocade switch through Web Tools
Launch Web Tools directly from a web browser: Open the web browser, type the IP address of the switch in the address field, and press Enter. In the Please Login dialog box, type the username and password, and then click OK.

How do I reset my brocade admin password?

Enter the passwddefault command to reset the root password to the factory default value or the /sbin/passwddefault -f (to reset the root password and forcefully enable the root account).

How do I enable root access on Brocade?

To display the status of root access settings from the admin access level, run the command:

  1. switch:admin> rootaccess –show.
  2. switch:admin> userconfig –show root.
  3. switch:admin> rootaccess –show.
  4. switch:admin> userconfig –show root.

How do I enable Brocade port?

To enable a port: Connect to the switch and log in as admin as described in Connect to the Command Line Interface. Issue the portenable portnumber command, where portnumber is the number of the port you want to enable.

How do you connect two Brocade SAN switches?

For connecting two SAN switches ISL (Inter Switch Link) needs to be formed over E-port. Initiators and targets are connected to F-ports. Then both switches form a single fabric. In case of brocadebrocadeBrocade is an American technology company specializing in storage networking products, now a subsidiary of Broadcom Inc. The company is known for its Fibre Channel storage networking products and technology.https://en.wikipedia.org › Brocade_Communications_SystemsBrocade Communications Systems – Wikipedia command fabricshow would show only one fabric on both switches if connected properly via ISL.

What is source port number?

The source port is a next-available number assigned by TCP/IP to the user’s machine. This assigned client number is how the network address translation (NAT), which typically resides in the router, determines which user to send back the responses to.