How big of a motor can you put on a 14ft Jon boat?
Typical horsepower for a 14-foot jon boat would be between 15 HP and 20 HP although up to 25 HP is not uncommon either. 20 HP can comfortably give you a top speed of 20mph, potentially even stretching to 25mph depending on weather conditions and the weight on the boat.
What size motor should I put on a 12 foot Jon boat?
12 foot – 10 – 15 hp motor. 14 foot -15 hp motor. 16 foot – 15 – 20 hp motor. 18 foot – 18 – 20 hp motor.
What size motor can you put on a 10ft Jon boat?
Maximum horsepower is based upon the size of your boat, with the range being around 3-5hp for small 10-12 foot boats, all the way up to 60-75hp for longer 18-20 foot Jon Boats.
How big of a motor can I put on a 16 ft Jon boat?
An aluminum boat that is 16 feet long needs to have a 60 horsepower motor. Once equipped, it can have a speed of 25 to 30 miles per hour.
Can a 40 hp pull a tube?
Depending on how many people your tube accommodates, a light 14-foot fiberglass boat with a 35-40HP engine could tow a small person on a single-seater tube.
How much hp does a 14ft boat need?
It depends on the boat. Some 14’s are wide and deep and could handle a 25 while others are narrow and shallow and would be scary at any higher speed or even sitting still with all that weight. A 15 hp is a good compromise, same weight as a 9.9 and enough speed.
How many people can a 14 ft jon boat hold?
three people
An average 160 pounds (72.5 kg) heavy and 14 feet (4.3 m) long Jon boat without an engine can hold 610 pounds (277 kg) of gear and passenger. The maximum of 15 to 20 HP lets this vessel clock at a top speed of at least 20 mph (32 km/h). It is an ideal option for three people.
How fast does a 25 hp jon boat go?
Aggie, I have owned several boats in this range now – with a brand new 25hp Yamaha you should be able to run 25mph max with RPM topped out – just yourself and light gear (no trolling motor or extra batteries etc.); that would mean a comfortable cruising RPM range would be around 20 mph.
Can you pull a skier on 40 hp outboard?
It’s possible to pull a single lightweight wakeboarder behind a 40 HP engine. However, the boat won’t create a big enough wake for a competent adult wakeboarder to enjoy.
How far behind boat should you tube?
Whether for tubers or water skiers, you want it to be around 100 feet at a minimum to keep your distance.
Are 12 foot Jon boats stable?
Size and capacity of the boat
The longer the Jon boat and the wider its beam the more stable it will be in choppy water. The smallest Jon boat available is around 10 to 12 feet and due to this small build, the stability of the boat is quite compromised when the water gets a little challenging.
How much weight can a 15 ft Jon boat hold?
Your 15 foot Jon boat therefore has an approximate weight capacity of 600 lbs.
How fast will a 40 hp outboard go?
40 hp – = 28 mph.
How fast will a 2.5 hp outboard go?
5.4 mph
5 Four-Stroke ($940; www.yamaha-motor.com) power: 2.5 hp weight: 38 pounds top speed: 5.4 mph noise at full throttle: 87 dB-A.
How many hp do you need to pull a tube?
Towing a single tube is possible with 35HP. Skiing needs more power, and while a child can ski with 20HP, a heavier adult needs at least 60 HP on an appropriately sized boat. While you can wakeboard with as little as 25 HP, a quality wake generally requires a 135+HP loaded boat.
How fast should you go while tubing?
between 20 and 25 mph
According to Blain’s Farm and Fleet, the recommended speed for tubing is between 20 and 25 mph. In addition to safety reasons, pulling a rider too fast and constantly knocking them into the water often makes them not want to do it again.
What speed should you pull a tube?
When towing young kids on tubes, keep the speed between 8 and 12 MPH. The younger the age, the slower the speed. When towing teenagers/adults on tubes, keep the speed from 15 to 20 MPH.
How much weight can a 12ft jon boat hold?
about 400 to 450 pounds
An average 12 feet (3.65 m) long Jon boat weighs 120 pounds (54.5 kg), excluding an engine. It can hold about 400 to 450 pounds (181.5 – 204 kg) of extra load. Thanks to a maximum of 5 to 7 HP, this vessel has a top speed of 10 to 15 mph (16 – 24 km/h).
How fast can a 12 ft jon boat go?
12 Foot Jon Boat Speed
10-15 mph is a good expectation for this boat size. This boat length will usually allow for a 5hp engine, with some models permitting up to 10hp engines. The 5hp engine will put you in the 10mph range, while the 7.50-10hp engines will push you 15+ mph.
How many people can ride in a 14 foot Jon boat?
14 feet (4.3 m) long Jon boat
The maximum of 15 to 20 HP lets this vessel clock at a top speed of at least 20 mph (32 km/h). It is an ideal option for three people.
How many people fit in a 14 foot Jon boat?
14-foot Jon Boat (4 m)
Crew: 3 passengers easily. Throw in a medium gear load or a child. Top Speed: Up to 20+ mph (32+ kph). Fast enough for most water sports.
How fast can a 40HP jon boat go?
A 40hp Pontoon boat with an average load of people can expect to reach speeds of around 10 – 15 mph.
How fast will a 5 hp outboard go?
10 miles per hour
A 5hp motor on a 12 foot Jon boat can reach speeds of up to 10 miles per hour.
Is 70 hp enough for tubing?
Horsepower and Speed
Tubing doesn’t require quite as much speed, and you can start to have fun at around 15 miles per hour. A pontoon boat with a 70 horsepower engine is plenty for tubing. At that level, you might be able to get up on skis too, but 90 HP will serve you much better.
What is Circle of Death in water?
A phenomenon called steering torque forces the motor to slam to the left, causing the boat to swerve sharply to the right and throwing the victim into the water. The boat continues to travel in a circle and returns to strike the victim in the water, inflicting massive propeller wounds—thus the term “circle of death.”