Are all Pinlock inserts the same size?
All Pinlock 30 insert lenses come in a universal size that fits all Pinlock 30 prepared helmets.
Can you add Pinlock to a visor?
To install the Pinlock® Push pins, firmly push the pins in the right position into the visor. When installing a new Pinlock® lens, make sure that the indicator (little arrow) of the pin is facing outwards.
How do you put a Pinlock on a visor HJC?
And you do this by opening the face shield and you’ll notice this little black lever on each side of the helmet where the face shield connects to the helmet.
What is a Pinlock on HJC helmets?
The Pinlock 70 creates a double shield system through a silicon seal between the helmet face shield and Pinlock insert lens, which makes up a double glass type of solution that prevents fogging. The insert is made of a moisture absorbing plastic and therefore, the surface basically dry when used.
How long do Pinlock inserts last?
Once dry, the Pinlock will do its job again. This having been said, a Pinlock will eventually pack up and, of course, this depends on the mileage you ride, and the conditions in which you ride. If you ride every day, often in cold and wet conditions, you might need to replace the Pinlock after a year or two.
Are Pinlock inserts universal?
Pinlock inserts are generally not Universal. They are specific to different helmet manufacturers and also models within those manufacturers’ line-up. The reason for this is that helmet visor sizes vary, and the only way a Pinlock insert will actually work is by being fitted correctly to ensure the seal is air-tight.
How long does a pinlock visor last?
This having been said, a Pinlock will eventually pack up and, of course, this depends on the mileage you ride, and the conditions in which you ride. If you ride every day, often in cold and wet conditions, you might need to replace the Pinlock after a year or two.
Can you use Pinlock at night?
The clear Pinlock lenses are absolutely suitable to use at night, it is the other way around for the Dark Smoke lenses.
Why is my Pinlock fogging up?
If your Pinlock® lens is not in optimal contact with the inside of the visor, moisture can build up between the Pinlock® lens and the visor. To tighten your Pinlock® lens, you can turn the pins on your visor until the indicator (little arrows) on the pins are pointing more inwards.
Whats the difference between Pinlock 70 and 120?
What is the difference between Pinlock 30, 70 and 120? The Pinlock 70 lens has a strong fog resistance level and is developed for de mid-range. The Pinlock 120 lens performance is developed to ensure a fog-free view in the most demanding weather conditions like pouring rains and high humidity.
Why is Pinlock yellow?
The main reason for this is that the yellow tint helps to filter blue and UV light, which improves visual clarity during broad daylight hours. They help to eliminate excessive shadows so things generally look brighter during periods of extreme haze or fogginess.
How do I stop my visor from steaming up?
So let’s take a look at what you can do.
- Open your visor and vents. Starting with the easiest solution, just open up the visor a little or all the way.
- Use an anti-fog visor insert/pinlock visor.
- Use an anti-fog spray.
- Use an anti-fog mask.
- Silicon based water-repellents.
- Dishwashing soap.
- Anti-fog coatings.
- Stick-on inserts.
Can I use a pinlock visor at night?
The clear Pinlock lenses are absolutely suitable to use at night, it is the other way around for the Dark Smoke lenses. It could be not convenient to use those at night because visibility then is really low.
Why does my Pinlock steam up?