What is a 1948 Farmall Cub worth?
No Reserve: 1948 McCormick-Deering Farmall Cub Tractor for sale on BaT Auctions – sold for $4,500 on November 26, 2021 (Lot #60,386) | Bring a Trailer.
How much does a Farmall Cub?
Cub owners almost form a cult. You can connect with them online by putting “Farmall Cub” in your search engine. Many YouTube videos show Cubs and implements at work and photos of specialized implements made by Cub owners. Used Cubs range in price from $1,500 to $5,000, depending on condition.
What is the horsepower of a Farmall Cub?
The Cub sat on a 69¼ inch wheelbase, using a 4-cylinder, C-60 gasoline L-head engine, that consisted of a 2⅝ inch bore by 2¾ inch stroke, with a displacement of 59.5 cubic inches. At 1600 rpm, early versions of the C-60 engine produced 9.25 horsepower (6.90 kW) on the belt and 8 horsepower (6.0 kW) at the drawbar.
What was the last year of the Farmall Cub?
IH ended production of the Cub in 1981. Over 245,000 had been manufactured, arguably making the Cub the most popular small tractor in history.
How many international cubs were made?
Cubs were also built for use in Europe at St. Dizier, France starting in 1955. Farmall made 224,203 Cubs between 1947 and 1964; they became International Cubs in 1964. In total, over 245,000 Cubs were manufactured between 1947 and 1981.
Where is the serial number on a Farmall Cub tractor?
plate, located on the right side of the steering gear housing.
What engine is in a Farmall Cub?
Farmall Cub Engine
| Engine Detail | |
|---|---|
| International Harvester C60 | |
| liquid-cooled | |
| Displacement | 59.5 ci 1.0 L |
| Bore/Stroke | 2.625×2.75 inches 67 x 70 mm |
Does a Farmall Cub have a 3 point hitch?
Farmall Cub 3-Point Hitch Kit:
You can have a modern 3-point quick-hitch installed with the turn of 7 bolts and zero modification of your Cub! With a quick-hitch, implements are swappable with any 3-point tractor, and are hitched up in seconds, without even pulling a pin or leaving the driver’s seat.
How do you tell what year a Farmall tractor is?
To determine the year, look at the last letter in the series. Add the number of that letter’s place in the alphabet (A = 1, B = 2, C = 3, and so on) to 1930 to determine the year.
Can you tell what year a tractor by the serial number?
In general, you cannot determine anything but the year from the serial number of an older tractor. You cannot find the exact date of construction, original dealer, or previous owners.
What is the smallest Farmall tractor?
Description. Pictured is the smallest Farmall tractor, over 200,000 Farmall Cubs were manufactured from 1947 to 1964.
How long is a Farmall Cub?
Farmall Cub Dimensions
| Dimensions | |
|---|---|
| Wheelbase: | 69.25 inches 175 cm |
| Length: | 99.325 inches 252 cm |
| Width: | 48.25 inches 122 cm |
| Height: | 62.75 inches 159 cm |
What is a tractor 3 point hitch?
Three-point hitches are made up of three movable arms. The two lower arms (the hitch lifting arms) are controlled by the hydraulic system. They provide lifting, lowering, and even tilting to the arms. The upper center arm (the top link) can be moved, but it is not usually powered by the tractor’s hydraulic system.
How do you tell what year a International Harvester tractor is?
How do you tell what year my tractor is?
First and foremost is the tractor serial number, which is stamped into an aluminum plate located on the right side of your tractor, on the steering gear housing. Use the tractor serial number table to look up the year.
What is a Category 2 tractor?
Category 2 hitches are also common, albeit on slightly more high-powered tractors with horsepower ranging from 40 to 125. A Category 2 hitch increases the top link pin diameter to 1 inch and the lift arm pins to 1 1/8 inch. The spacing between the arms increases to approximately 32 inches.
What are the arms called on the back of a tractor?
These include the tractor’s hydraulic system, attaching points, the lifting arms, and stabilizers. Three-point hitches are composed of three movable arms. The two lower arms—the hitch lifting arms—are controlled by the hydraulic system, and provide lifting, lowering, and even tilting to the arms.
How do I read my IH serial number?
The Kind/Code line reads: 2590009U004452. Translated, the Kind is 259, the Code is 009, The U represents United States (Country of Manufacture) and the 4452 is the actual serial number of the machine.
Where are international tractors made?
Production of the new Case IH tractors moved to J.I. Case in Racine, Wisconsin. Production of IH Axial-Flow combines continued at the East Moline, Illinois, factory.
Do tractors have VIN numbers?
Tractors have VIN or Chassis numbers usually below the driver’s seat. Every manufacturer engraves a VIN number on every tractor body they produce.
What is a Category 1 tractors?
Category 1
You’ll widely find these on tractors offering between 20 and 50 horsepower. The top link pin measures 3/4 inch in diameter, while the two lift arm pins are slightly thicker at 7/8 inch. The spacing between the lift arms is approximately 26 inches. You may also find references to “limited” Category 1 hitches.
What is the difference between a Category 1 and 2 tractor?
Category 1 Hitch For tractors with 20 to 50 horsepower. Category 2 Hitch For tractors with 50 to 90 horsepower. Long days can seem even longer when you aren’t comfortable. Make sure you take a test drive with every tractor you’re considering.
What is a 3 point PTO?
What is a farm Ripper?
Ripper: A long steel shank (also referred to as a subsoiler) that loosens the soil to a much greater depth than other implements, but does not mix the surface layers of the soil like a tiller.
How do you tell what year a tractor is?
When you want to identify the year of your tractor, you can look at several things. First and foremost is the tractor serial number, which is stamped into an aluminum plate located on the right side of your tractor, on the steering gear housing. Use the tractor serial number table to look up the year.