How do you use Polyquat 60?
Applications
- Clean filter as needed and adjust water balance.
- For best performance pH should range between 7.2 and 7.6.
- Initial treatment: Add 6-11 ounces per 10,000 gallons of pool water.
- Maintenance dose: Add 2-4 ounces per 10,000 gallons of pool water weekly.
How do you use algaecide 60?
For treatment of freshly cleaned and filled pools, add 6 to 11 fluid ounces of In The Swim algaecide 60 plus per 10,000 gallons of water. Subsequent additions of 2 to 4 fluid ounces of In The Swim algaecide 60 plus per 10,000 gallons of water must be made every 5 to 7 days after initial treatment for maintenance.
How long does it take algaecide 60 to work?
Giving your pool regular algaecide treatments is recommended, but how long does it take for the chemical to dissipate? You must know that you need to put the algaecide in the water only after a pool shock. It will take approximately two or three days for the shock and the algaecide to kill all algae in the water.
What is algaecide 60 plus?
Algaecide Plus
Effective in preventing the growth of green, black, and mustard algae. Ideal for all-around use in pools with attached spas and water features. Algaecide 60 should be used on a regular basis. Concentrated algaecide for use in swimming pools. Kills and prevents all types of algae.
What does Poly 60 do?
Algaecide Poly 60 is a highly versatile algaecide that controls and prevents all types of pool algae. Algae prevent is non-foaming, so no need to buy additional foam down products. This algaecide/algae preventative can be utilized with chlorine or bromine systems.
Does Polyquat 60 have copper?
An alternative to copper algaecide is the polyquat, which are quaternary ammonium compounds instead of a copper formula. They treat and prevent algae growth in a different way.
Can you put too much algaecide in your pool?
Too much algaecide can cause foaming that can damage your filter. In some cases, too much algaecide can also cause eye and skin irritation. In addition to adding algaecide after shocking your pool, you should add algaecide to your pool water when closing down for the year.
How much algaecide do I need?
Pool Algaecide:
Initial Dosage: 12 oz. per 10000 gallons. Maintenance Dosage: 3 oz. per 10000 gallons, weekly.
What happens if I put too much algaecide in my pool?
The presence of too much algaecide can lead to a foamy pool water. Small bubbles will begin to be produced as the water is pushed through the return jet and back into the pool. Do not confuse these bubbles and foam with another common problem, which is air in your pool lines.
Why is my pool still green after shock and algaecide?
Pools can immediately turn green after shocking when they have metals like copper in the water. These metals oxidise when exposed to high levels of chlorine which makes the pool water turn green. Adding a metal control product such as Zodiac Metal Remover will help to restore the pool water.
Can you put too much algaecide in a pool?
Do you shock pool before algaecide?
While shocking and adding algaecide is effective in getting rid of algae, it should not be done together. This is because when you mix chlorine and algaecide together, it renders both of them useless. Hence, you should first shock the pool and wait for the chlorine levels to fall below 5 PPM.
What is pool Polyquat?
ProTeam Polyquat 60 is an algae preventative for hard-to-kill mustard, black, and blue-green algae types. This product is non-metallic and non-staining. Proteam Polyquat 60 promotes sparkling blue pool water. This algaecide is highly concentrated.
Is Polyquat safe?
The Expert Panel concluded that polyquaternium-22 and polyquaternium-39 are safe in the present practices of use and concentration in cosmetic formulations.
Why did my pool turn green after adding algaecide?
You used copper-based algaecides
Using too much copper-based algaecides can spike up the copper levels in your pool and turn your pool water green. Using a metal-free algaecide can prevent this from happening.
Can I put too much algaecide in my pool?
How long should I run my pool pump after adding algaecide?
Run your pump overnight, or if possible, for 24 hours to clean all the debris from your pool water.
Do you run pump when shocking pool?
Prepare shock ahead of time in a 5-gallon bucket of pool water and stir. Ensure the pool pump is running. Pour the mixture from the bucket into the water around the edges of the pool. Let the pump run for about 6 hours or more and test the water.
What happens if you put too much algaecide in your pool?
Will algaecide clear up a green pool?
Algaecides treat and prevent pool algae, but not all algaecides are created equal. To treat green pool water, ensure you select an algaecide that kills green pool algae. After treatment, some dead algae may remain in your pool. Continue to thoroughly brush your pool’s surfaces often.
What happens if you put too much algaecide in a pool?
Too much algaecide results in water that is full of tiny foaming algaecide bubbles in the pool which can damage the filtration system. Too much algaecide can also cause eye and skin irritation. It is recommended to stay out of the water until the algaecide concentration dissipates.
Is Polyquat 7 natural?
This ingredient is a synthetic polymer based on quaternary ammonium compounds.
Is algaecide harmful to humans?
Harmful if swallowed or absorbed through the skin. Avoid breathing vapor or spray mist. Avoid contact with skin, eyes or clothing. Prolonged or frequently repeated skin contact can cause allergic reaction in some individuals.
Can algae grow when chlorine is high?
Yellow/ Mustard algae is very resistant to even high chlorine levels and will grow and thrive in a chemically well-balanced pool.
Do I use shock or algaecide first?